D
Deleted member 5106
Suggestion Title: MP Controller Trial
Division: Control
Please read the whole thing before we doss it off! - I intend this to be TRIALLED.
So, my suggestion is trialling a separate channel, being channel 9 for example called Interops MP or something and have a FIM controller stationed in there waiting for pursuits comms so we can go straight ahead.
For this to be active, there needs to be at least 1 CAD controller and 1 COMMS controller both in channel 1.
Comms can look like the following in Interops MP.
IPP/RTPC/AFO drivers, "MP Active message, XX10."
MP Controller, "XX10 go ahead MP over."
IPP/RTPC/AFO drivers. "MP XX10, *NORMAL pursuit comms*"
MP Controller to IPP drivers, "XX10 the pursuit is authorised in the Initial Pursuit Phase, more units towards now. Please acknowledge. MP over."
--
MP Controller to Advanced/TPAC drivers, "XX10 the pursuit is authorised in the Tactical Pursuit Phase, more units towards now. Please acknowledge. MP over" - AND ALL BOXES AND LOW SPEED CONTACT AUTHORISED SINCE ITS A FIM CONTROLLER AUTHORISING TPP.
IPP/RTPC/AFO drivers, "MP, XX10 that's confirmed/received/acknowledged."
ALTHOUGH this may seem complex, it really isn't. Once it has been done once or twice, people will know how to do it and will be very easy and be more engaging rather than clogging up channel 1 which is already extremely saturated. I believe this would be a good step forward without changing the actual pursuit comms and just making it SLIGHTLY more realistic with an MP controller. (I have a video to back up this from the met if you would like to see!)
MORE than happy to take feedback from controllers, IPP drivers, RTPC and AFO drivers, as well as command and everyone else who is interested. Please submit your opinions and feedback, would love to hear.
Division: Control
Please read the whole thing before we doss it off! - I intend this to be TRIALLED.
So, my suggestion is trialling a separate channel, being channel 9 for example called Interops MP or something and have a FIM controller stationed in there waiting for pursuits comms so we can go straight ahead.
For this to be active, there needs to be at least 1 CAD controller and 1 COMMS controller both in channel 1.
Comms can look like the following in Interops MP.
IPP/RTPC/AFO drivers, "MP Active message, XX10."
MP Controller, "XX10 go ahead MP over."
IPP/RTPC/AFO drivers. "MP XX10, *NORMAL pursuit comms*"
MP Controller to IPP drivers, "XX10 the pursuit is authorised in the Initial Pursuit Phase, more units towards now. Please acknowledge. MP over."
--
MP Controller to Advanced/TPAC drivers, "XX10 the pursuit is authorised in the Tactical Pursuit Phase, more units towards now. Please acknowledge. MP over" - AND ALL BOXES AND LOW SPEED CONTACT AUTHORISED SINCE ITS A FIM CONTROLLER AUTHORISING TPP.
IPP/RTPC/AFO drivers, "MP, XX10 that's confirmed/received/acknowledged."
ALTHOUGH this may seem complex, it really isn't. Once it has been done once or twice, people will know how to do it and will be very easy and be more engaging rather than clogging up channel 1 which is already extremely saturated. I believe this would be a good step forward without changing the actual pursuit comms and just making it SLIGHTLY more realistic with an MP controller. (I have a video to back up this from the met if you would like to see!)
MORE than happy to take feedback from controllers, IPP drivers, RTPC and AFO drivers, as well as command and everyone else who is interested. Please submit your opinions and feedback, would love to hear.
Last edited by a moderator: